Customer / Manufacturer Quotes about Datsun Parts
Nissan/OEM/AfterMarket Differences
Ordering, Shipping, Returns, Policies
Limits of Liability Statement Important Read
| Images | Categories | Description | Price |
|---|---|---|---|
  |
Restoration Products Sale Exhaust |
Partnumber: 1263 Datsun Roadster 2000 Header & Stroker 1600 Flex Pipe AFTER MARKET USA Stainless Steel Exhaust Flex Pipe We first used a flex pipe on our Solex 67 2000 24 years ago and have been happy ever since! Stainless steel construction allows movement of the motor while the exhaust stays rigid and undisturbed |
$78.00 |
 |
Fuel Systems Sale Electrical Switches |
Partnumber: 1366 Datsun Roadster Fuel Sending Unit W/O-ring NISSAN OR AFTERMARKET 67 1/2 - 70 Fuel tank sending unit with o-ring.NOTE: This is the, correct, sending unit with the tabbed plate to index in the correct position. NOTE:Order by PART# 2366 |
$186.00 |
  |
Restoration Products Engine 2000 Customer Rewards Program Sale Engine |
Partnumber: 1401 Datsun Roadster U20 Oil Pump OUR BEST SELLER FOR 11 years! ONE PER CUSTOMER AFTER MARKET $100.00REW After market replica U20 oil pump. This pump is higher volume than the 1500/1600 oil pump. Same company makes after market oil pumps for Toyota, Nissan & Honda. This reputable company sells tens of thousands of pumps each year that are distributed all over the planet. They have a TS16949 designation; International quality certification and use CMM technology, Taiwan not Chinese, based company. Almost 1/2 less in price then pumps being offered on the net. 2nd PHOTO: Two pumps shown for comparison. Aftermarket on the left, Nissan original on the right. You can hardly tell the difference inside and out. Absolutely amazing quality! NOTE: 1600 and R20 owners can use this pump instead of the forklift or original Nissan 1600 pump. IHM CO. has provided a laboratory test conformity report, included with the pump, comparing flow, pressure etc. between a New Nissan pump and the Aftermarket pump. Other pumps being sold on the net were not tested and are not marked as such. Amazing how close the numbers are! There is also a test report comparing both pumps when installed in a 2000 roadster. This part is NOT made in China. In vehicles all over the world for 10 years. Over 60,000 miles on some cars! 11/03/10 |
$170.00 |
  |
Sale Mirrors Restoration Products |
Partnumber: 1436 Datsun Roadster 68 - 70 Inside Rear View Mirror Mount 68 - 70 rear view inside mirror mount |
$29.00 |
  |
Engine 2000 Sale Customer Rewards Program |
Partnumber: 1495 Datsun Roadster 2000 U20 Oil Pump - NISSAN $500.00REW U20 oil pump is a more higher volume pump than the 1600 oil pump. Very hard to find. Comes in a sealed Nissan box Part# 15010-25501. This is the genuine article sealed and pristine in the original packaging. |
$610.00 |
  |
Sale Cooling |
Partnumber: 1504 Datsun Fairlady 63 - 65 1500 & Early Datsun Roadster 65 - 67 1600 Water Pump LIFETIME WARRANTY FREE REPLACEMENT! Top Quality Early Style 1500/1600 pump from Japan with cast impeller NOT STAMPED IMPELLERS like economy water pumps. 5 year warranty This pump fits the 63-67 3-main 1500 & 1600 engine correctly: Much better than the cast iron pump that had a smaller bearing, was prone to early failure and that is God awful expensive. Factory cast iron pumps have been out of production for 10 years and sell from $309.00 to $359.00 and for that you get dried up seals and no warranty from Nissan and no replacements. We had NPW of Japan make 100 water pumps with the shafts shorter and the lower casting area machined so this aluminum water pump mounts up the same as your early water pump. Since they performed these modifications the warranty, if ever to arise, will be honored. Water pumps being sold by other vendors that are modified without the express permission of the manufacturer would consider changes to their water pump as tampering and no warranty would be extended to them if a problem were ever to arise. Shaft does not protrude thru the metal 4-blade fan - no need to drill your OEM metal fan. Comes with replacement bolts and lock washers to secure the fan Short stud mount for early 3-main 1500's and 1600's Direct bolt on. Stud change not required which is typically a nightmare. Top Quality Aluminum Pump to replace that tired old cast iron pump! |
$185.00 |
  |
Restoration Products Sale Brakes |
Partnumber: 1563 Datsun Roadster Flexable Stainless Teflon Lined Brake Hoses AFTER MARKET USA(G/E) 65 - 70 1600/2000 Stainless steel brake hose set. Upgrade from the original rubber hose set. See part # 1533 for rubber hoses. Comes with new sealing washers. Correct hex for indexing to the star holder on the bracket on the frame. Hex will not rotate when tightened. Necessary and important component to keep the lines away from moving suspension parts like coil springs. The lines that are pictured come with a Clear transparent plastic covering over the stainless portion of the hose. Also available,SPECIAL ORDER, (SEE 2nd PHOTO), in the following transparent colors. Red, Electric blue, Hunter green, Smoke clear, orange and black. Set of 3. NOTE: Brake hose keepers are no longer included with this kit. You can add them on. Order by PART# 2733 $7.50 |
$99.00 |
 |
Sale Suspension |
Partnumber: 1578 Datsun Roadster & Fairlady Front sway bar 23mm Bushing - Set of 4 AFTERMARKET USA Front Urethane competition 23mm sway bar bushing kit if you have upgraded to the large comp sway bar. This part has two important distinctions. The first is that we were the first Datsun Roadster parts house to design, create and sell a urethane part for the Datsun roadster community. The second was that we were the first Datsun Roadster parts house to have Nissan Motor sports sell our product in their competition catalog. See more in this section to see these exclusive items we have created. |
$59.00 |
 |
Restoration Products Sale Suspension |
Partnumber: 1581 Datsun Roadster & Fairlady 18mm Sway Bar Bushing - Set of 4 AFTERMARKET USA 18mm Urethane front sway bar bushing kit. Stock rides are never left out of our design program. Use on your stock sway bar for better handling. Have you checked the sway bar end bushings lately? They are probably egged out. |
$59.00 |
   |
Sale Suspension Restoration Products |
Partnumber: 1672 23 MM Competition Front Sway Bar W/Bushing Kit AFTERMARKET USA For you die hard enthusiasts! TWO things happen here. 1) You can get into a 23mm bar at reasonable pricing and not have to pay $400.00 for one! 2) We are the only Vendor offering a, current production 23MM bar, so there is no worry of this ever being out of production and becoming unavailable. Exact to dimension 23 MM Metric material is nearly impossible to find here in the US, but we found it. 23 MM Competition Front Sway Bar. Dimensions as per Nissan original. For Gold color Order by PART#1672GBU For Black powder coated finish Order by PART#1672BBU Both bars come with our 4 piece urethane bushing kit. |
$299.00 |
 |
Sale Cooling |
Partnumber: 1768 Datsun Roadster 68,69, 70 1600 Water Pump W/GASKETS - BRAND NEW NO EXCHANGE REQUIRED LIFETIME WARRANTY FREE REPLACEMENT! AFTER MARKET JAPAN & USA 68 - 70 1600 Water pump. Brand new without nipple. NOT rebuilt with parts from an old pump. Vendors re-using old flanges comes off really low budget and cheap and doesn't follow shaft/flange class fitting procedures that professional water rebuilders use for proper interference fit of these parts. Add another $18.00 to return your old pump ends up being not such a good deal. No stamped steel impellers prone to cavitation. Our pumps only have cast iron impellers and are made by the same company that makes Nissan water pumps. NOTE: Be sure add to your water pump order the stainless steel by pass nipple, shown in the photo, as it is not included in the price. Order by PART# 2570 Do not re-use the old clutch fan as this was one of the contributing overheating problems of the late year cars. Nissan created a replacement spacer block, no longer available, to allow the fan to turn continuously. NOTE: This pump will work with either the Nissan spacer or our spacer. It will not work with the original fan clutch and why would you want it to anyway for the obvious reason of Nissan's discontinuance of a faulty design? Some individuals gut the original fan clutch unit and drive sheet metal screws into the hub as a means of centering the assembly to fasten to the fan blades. We warn you against this kind of bubblegum repair that could cause water pump bearing failure or catastrophic failure of the fan and clutch assembly. Click here, to see our replacement of the Nissan version. |
$285.00 |
 |
Restoration Products Transmission 4 Speed Transmission 5 Speed Sale |
Partnumber: 1861 Datsun Delrin Shifter Lever Bushings - (2) AFTERMARKET USA High quality precision machined Delrin Shifter bushings. Many prefer these over the "softer" Nissan bushings or the aluminum bushings that Nissan Motor Sports carried or our aluminum bushing set we sell. |
$19.10 PR |
 |
Brakes Customer Rewards Program Sale Clutch |
Partnumber: 1980 Datsun Roadster Stainless Steel Brake & Clutch Hose 4 Piece Assembly AFTER MARKET USA(R/E) $160.00REW Stainless Braided brake and clutch hose 4 piece kit. Comes with sealing washers. All correct fittings! NOTE: Brake hose keepers are no longer included with this kit. You can add them on. Order by PART# 2733 $12.60 |
$170.00 |
  |
Sale Cooling |
Partnumber: 2080 Datsun Roadster Nissan 67 1/2 2000 Lower Radiator Hose LIFETIME GUARANTEE Correctly Formed Hose NOT 68 - 70 AFTERMARKET USA 67 1/2 2000 LOWER RADIATOR HOSE. Same quality as our 2176 hose that we have been selling for 9 years. We will replace for free if it ever fails! Yes, we know, there are 68 - 70 style hoses being sold by vendors as 67 1/2 2000 replacements... wrong! Our hose is an exact replica in shape 2nd PHOTO IN STOCK Great hose with internal cloth webbing sandwiched inside and protected inside of the rubber like the later Nissan hose that is pictured in the 1st PHOTO. The hose does not have the outer cloth covering like the hoses that came with the cars, Nice stuff I like original too. Nissan eventually discontinued sale of those hoses because of the problematic issue with the cloths exposure to fluids, the cloth webbing drying out, becoming crunchy within the length of the hose, eventually bulging and bursting under pressure. Nissan chose not to renew the contract for the cloth covered hoses as manufactured in favor of the newer technology, more expensive to make and quite frankly better quality hoses, like the one here and all subsequent hoses they had made for all their manufactured vehicles both domestic and for international use. If after all this you still want the external braiding? Jim Tyler has them and he says "there is nothing finer". In the mean time we will blow these out of the inventory. Same quality as our 2176 hose that we have been selling for 9 years |
$59.00 |
 |
Sale Engine external Customer Rewards Program Restoration Products |
Partnumber: 2108 Datsun Roasdster 68-70 Braided Oil Pressure Gauge Hose AFTER MARKET USA $99.00REW Custom machined fittings specifically made, matching exactly to the original Nissan fittings. Made and assembled in the USA. NOT Aeroquip's line of generic fittings made in China. Our line is made by an aerospace firm here in Los Angeles. Compare our line to the factory line in the photo. No extra fittings/coupling, leak points to adapt one stock part to another. If we were going to make a just few lines we might have gone the easy route and use a bunch of generic readily available Aeroquip lines, but we wanted a solid line and one that looks like the original. Clean, exact replica, lots of diligence to make it right as opposed to a throw together, quick buck, budget off brand line product...not here not ever! Here's a product that has merit. 800 sold over 14 years. Shop & Compare. Let your own eyes compare and make the decision for you!! 68-70 Replacement braided oil pressure gauge hose. See original Nissan in foreground. Correct and exact reproduction fittings exclusively made for Datsun Parts. Frame end fitting M10 by 1.25, block end fitting 1/8 BSPT - that is British NOT American pipe thread. No longer necessary to by other generic stainless lines and tap out the block for American 1/8 fittings or take a chance rebuilding your old line with the possibility of line failure! This is the real deal. Properly machined and accurate frame end fitting to engage the frame rail stand-off and keeper. Pre-tested to working pressure of 3000 PSI. Way overkill as this hose will never see any pressure anywhere near this figure. Flexible.....won't kink or break. Check out what the regular Nissan hoses are selling for. Click here, to view this part. |
$120.00 |
        |
Sale Suspension |
Partnumber: 2116 Datsun Roadster & Fairlady Front Lowering Spring My Regular Comp Spring AFTER MARKET USA Compare this spring to ones being sold for $235.00. Material shortages are not effecting the price of our springs as they are made by engineers at Duer Carolina Coil in South Carolina. Your car will sit at the same height as the MY / JT spring and has the same rate. I guess you could call this a Mike Young replica spring as customers have remarked, but this spring stands on its own. Excellent ride, stability and comfort. Perfect height/stiffness compromise. Firm ride, but not harsh. To order this spring set with the O-ring pads Order by PART# 2116PAD $175.00 This spring is not the Super Comp 2113 spring. This spring lowers the car 1.250. Springs rates were tested on a US made calibrated Larson Flash 36 load tester rated with a 5,000lb cell which cost $90,000. Not tested on a $1,000.00 Summit Nascar cage less spring tester used by those parsimonious vendors working out of their garages. Wire hardness tested on a US made Newage calibrated Brinell hardness tester 7000 This spring brings greater diversity to our suspension kits and make it easier for one stop shopping for all our supplemental add on suspension delights! EXPANATION OF PHOTOGRAPHS: Measurements were taken at 90 degrees through the centerline of the wheel. Depending on how and what roads you drive on you may wish to modify the bumps stops for clearance up to 1 inch. Tool used to measure the bump stop clearance was positioned upside down, decibel point on the right, for ease of photography. Both are fine springs and are very close to each other in height and bump stop clearance. Nissan short bump stops were used on the test car Measurements were witnessed by 311 participants CUSTOMER COMMENTS: Steve Jordon - "Great springs superior ride to what I had in there before" Victor Stein - "The only place to buy parts. Very happy with them and the pricing. Harlan Katz - I like the ride of these springs. Not hard at all. Steve Schmidt - Beautiful springs pound for pound as good as the Mike Young springs that came with my 2.0 Jeff English - Dean you make it hard for someone to choose a spring, having so many to choose from, so I bought the 2116 Mike Young comparable spring and the Datsun replica spring. I like them both...especially like the Datsun replica sticker that came with the 2103!!! Joseph R Delia - Just received my set. Love the spring pads perfect fit clearances as represented and the ride really nice. Will move on to the rear springs. Which one do your recommend the 158 or 185 lb? Bill Bourne - Thanks Deano for making this available they are what the car needed. Skip Madison - Southern hospitality says join me for dinner. Your parts are hands down great. Never a disappointment. Pairing these with my carbon fiber rears for even better performance. Ever down here join us buddy. Tom Wienert - What's with the Mike Young spring pricing these days "there must be gold in them hills"? This just goes to show you don't have to pay an exorbitant fee for a good solid product and I don't have to wait or chase anyone around for a common item. Bob Kulow - These springs fit like a glove into their receptacles in the car. Nice amount of lowering and great look. Paired with the bump stops NICE! Peter Dupree - Always a smorgasbord of parts to choose from. No fat poured. Now to change the old shocks out. I'm on a diet of Datsunparts.com offerings...! Sven Norvitz - Fitting very good and performance excellent. Expensive to ship overseas but good value Rick Parshall - Car handles real nice. Good job on the spring isolators. Shiro Kato - Everything well We need Koni Datsun originals to complement. Ricard Santillan - Since you asked, I like this spring. I haven't completely decided yet as I really dig the 2103 spring you just came up with. |
$135.00PR |
 |
Suspension Sale |
Partnumber: 2151 Datsun Roadster & Farilady Differential & Leaf Spring U-Bolt Kit AFTERMARKET USA 4 - piece U- bolt Kit w/washers & Nylon Teflox nuts.This part made at the request of Ron Chase |
$59.40 |
 |
Sale Suspension |
Partnumber: 2159 Datsun Roadster & Fairlady Lowering Spring Super Comp & Regular Comp Spring SET OF 4 US MADE Yes 4 lower springs are included in this kit. Use the 2113 shorter comp springs for slalom driving or street and the 2116 style springs included for polite touring, everyday driving. See Part numbers 2113 & 2116 for spring rate and more info. PHOTO Super Comp on the left & My Reg comp spring on the right. Some customers are calling the 2116 spring a Mike Young replica. We just call it a fair price for a US made product. Tested on a Larson Flash 36 load tester rated with a 5,000lb cell which cost $90,000. Not tested on a $1,000.00 Summit Nascar cage less spring tester. Wire hardness tested on a US made Newage calibrated Brinell hardness tester 7000. Don't forget the to add on the lower comp bump stops 2 styles available. Click here Click here to see them. An instruction sheet is included with the springs. |
$235.00 |
 |
Lamps and Lights Sale Restoration Products |
Partnumber: 2588 Datsun Roadster & Fairlady 63 - 68 License Lamp Lens AFTER MARKET USA License lamp lens for early license lamp assembly. See gasket that seals this lens. Part# 2582 |
$29.01 |
     |
Engine Timing Components 2000 Sale |
Partnumber: 2615 Datsun Roadster U20 Upper Chain Guide Rail ISO 9001:2015 Certified SAMPLES TESTED & APPROVED AVAILABLE DECEMBER 2018 U20 upper chain guide rail. CHEAPER IN KITS |
$325.00 |
 |
Brake Kits and Packages Sale Brakes |
Partnumber: 2691 Datsun Roadster Brake Hose Assembly (3) NISSAN Set of 3 Nichirin OEM brake hoses with washers |
$184.00 |
    |
Engine 2000 Sale Engine Engine external |
Partnumber: 2867 Datsun Roadster U20 Extreme High Quality RACE or Street Front Damper Full Race SFI Certified US MADE Best Quality, Beautiful CNC production. 100% new, not a rebuild. Responsibly sourced US made. Serial numbered and great price compared to what these normally sell for in the $600.00 range. Imagine what JT would be selling these for if he had them! Other harmonic balancers simply don't compare as they have NO SFI certification Precision balanced. Good to at least 9k - fully suitable and approved for racing unlike economy versions sold by others! Economy dampers are NOT SFI certified for racing, never was and never will be. There is nothing in their design to keep them from eventually coming apart and history has proven this. This is the best damper made, but always the best from Datsunparts! . U20 SFI Certified for Full race - Front crankshaft Damper. Can be used for R16 using a SKF 18854 seal 48mm x 68mm x 11mm in the R16 timing cover. This is not a budget part! Anyone can spin a harmonic balancer up to 9,000 RPM on an electric motor and say it won't come apart. That is not the same as what is experienced by this part on a combustion engine. Dampers are made from billet steel and are NOT cast. SFI approved and certified for racing and street. This balancer will not come apart like a regular stock or an aftermarket one, henceforth why ours has an SFI certificate. Dampers offer the most precise and advanced execution of the proven elastomer-style harmonic damper (also referred to as Torsional Vibration Damper, or Harmonic Balancer) design. Most engine designers prefer elastomer-type dampers because of their durability, superior high-frequency damping qualities, and ability to dampen all types of vibrations: torsional, axial and radial. Other damper designs are limited to damping torsional vibrations only. S.F.I. 18.1 approved dampers are typically lighter than the O.E.M. units they replace and also lighter than many competitive aftermarket dampers. For Street Version Order by PART# 2867S $399.00 For Race Version Order by PART# 2867R $399.00 NOTE: The company that made this damper also makes dampers for T-1 Race development GTR in Texas and also for Datsun Spirit in Virginia specializing in Datsun L-series performance parts, They make many other dampers for legitimate prominent sellers around the world. They do not sell to individuals working out of there home garages. |
SEETEXT |
 |
Sale Steering |
Partnumber: 2868 Datsun Roadster & Fairlady Idler box Bushing & Seal kit NISSAN & AFTER MARKET USA Idler box kit that contains the following; threaded upper bushing, bronze lower bushing, lower seal, and zerk fitting. Note: You will need to hone the lower bushing to match your idler box shaft or our new shaft for proper fitment. All Nissan parts except the threaded upper bushing US MADE. 09/01/18 |
$124.20 |