Pictured is the complete goody bag when you buy a Piston set from us. We have priced it complete with everything. No added or hidden charges.
Pistons are within 1% of gram weight to each other. Sealed in Factory packages you get the pistons, pins, Hastings rings and the cir clips for the pins. We opened a .040 set for the photo. Also available in .020.

.020 set Order by PART#1318NA $940.00

.040 set Order by PART#1318NB $970.00

1ST PHOTO:U.S. made Flat top piston sets comparable weight to Nissan originals. Pre-fitted piston pins. Sets have improved pin area and may not have steel inserts as per Nissan
OUR PISTONS ARE FROM A REPUTABLE US COMPANY, MADE IN THE USA
Our pistons are not NPR Pistons. Even though NPR has offices in the US and they are a Japanese company, all their pistons sets come from Toto in Korea or Taiwan and their rings are made by NPR Japan. NPR never, ever made pistons in Japan and always out sourced them in other countries. NPR stands for Nippon Piston Rings NOT Nippon Piston & Rings. If you wish to confirm this just check on line or contact NPR product manager: Naoya Kihara office in Buena park, Ca. 562-207-6882


Our aftermarket pistons are Non strutted pistons and are much more stable on the operating dimensions with combustion temperatures than the older design steel strutted pistons. The steel strutted piston can develop cracks overtime that develop due to the difference in heat expansion of the two different materials. Non strutted pistons are stronger amid the life operation of a piston as they expand and contract on the cool down and reoperation temperatures much more consistently.


Sizes available in U.S. made pistons:

.020, .030, .040, .060 ALL SETS INCLUDE RINGS, PINS & CIRCLIPS

STD Order by PART#1318USASTD - $450.00 ALLOW APPROXIMATELY 7 DAYS

.020 set Order by PART#1318USB- $290.00

.030 set Order by PART#1318USC - $470.00

.040 set Order by PART#1318USD - $240.00

.060 set Order by PART#1318USE - $240.00

All U.S. made sets come with Deves or Hastings rings in the default pricing above. You have the option choosing, Sealed Power and Perfect Circle rings where available. Add $70.00 to the price for these rings.

NOTE for US piston sets: Piston to wall clearance: The "dial point" is, .900 up from the bottom of the skirt, where the clearance is established/measured between the piston and the cylinder wall to obtain a desired clearance of.0015.

SPECIAL NOTE: ALL Nissan and Aftermarket piston sets come with piston pins, cir clips and rings.

The most complete, highest quality sets in the industry. We include gaskets and parts even the factory left out.

These deluxe gasket sets are hand built with genuine Nissan parts or superior custom made gaskets where applicable. We have tooled and remade a number of the gaskets in the photo and created them in heat resistant Nitrile rubber/Cork composite material. A Brass freeze plug kit is included with both sets as well.
Sets are specifically built to year so please specify so you'll get the correct gaskets for your engine. List of gaskets: Here is a description of the gaskets contained in the 2 listed kit numbers below. Please click the thumbnails to view which gaskets come in each kit. .032 metal sheath composite Int/Ext, 6 - block freeze plugs, 1-cam plug, fuel pump phenolic w/gaskets attached, 3-early thermostat housing, 2 - late thermostat housing, distributor housing, distributor o-ring, .125 nitrile/cork oil pan, inner water pump, outer early water pump, 2 - outer late water pump, oil pump, 2 - R16 Nitrile rubber re-usable carb to air filter, 4 - .062 carb phenolic, 3 -hole header collector, cork timing cover, timing cover seal, Head gasket, 8 - late valve seals, Nitrile/cork valve cover, radiator cap, oil filler cap, 2 - valve cover grommets, oil filter housing, lower tensioner, oil pan nut washer, 2 -side bearing cap, 2 - premium rope seals, carburetor air filter gaskets.

65 - 67 Version $400.00 Order by PART#1324E Includes the 1695AM valve stem seals

67 1/2 - 70 Version $400.00 Order by PART#1324L

To substitute the thicker R16 head gasket in either of the above kits order the kit part numbers below:

65 - 67 Version $548.00 Order by PART#1324TE Includes the 1695AM valve stem seals

67 1/2 - 70 Version $547.00 Order by PART#1324TL

Interested in only the Nissan versions of these kits? Click here for the early 1600 Nissan Gasket set and click here for late 1600 Nissan Gasket set.
NOTE:Early o-ring valve seals are no longer included in 65 - early 67 kits. The upgraded new seal is included instead.